 Friends links |
|
| Picture |
Heading |
Updated |
 |
Nickel Bronze Brazing Alloy
Nickel bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The strength of joint is hig |
2017-09-17 |
 |
Phosphorus Tin Silicon Brazing Alloy
Copper phosphorus is principle elements of the product, with the tin, antimony and other elements. Brazing temperature is low. It is applied in the resistance brazing, flame brazing and high frequency brazing. |
2017-09-14 |
 |
Sn-In Solder
Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta |
2017-09-02 |
 |
Tin Bronze Brazing Alloy
Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. |
2017-08-28 |
 |
Aluminum Brazing Alloy
Aluminum alloys solder is applied for joinning aluminum to aluminum alloys, or some aluminum solders can be used for joinning aluminum to copper. It is not suitable for joinning other metals as the oxide on the surface of aluminum solder is difficult to b |
2017-08-07 |
 |
Flux Coating Silver Brazing Alloy
The silver brazing alloy can be made into flux coating brazing alloy. Flux coating silver brazing alloy is applicable to automatic brazing. It need not coating flux, can has higher production efficiency, saves the material consumption. |
2017-08-04 |
 |
Copper Nickel Alloys
Copper Nickel Alloysis applied to the brazing of stainless steel,hard alloys such as tungsten, molybdenum, iron, kovar, nickel etc, applied widely in the industries of machinery, electromechanical, refrigeration, automobile and bicycle etc. |
2017-08-03 |
 |
General Brazing Flux
Flux has lower melting point than brazing filler metal, good surface activity. It can break or dissolve metallic oxides on the surface of work and brazing alloys during the process, which is good for the liquid brazing alloy wetting the surfaces to permi |
2017-08-01 |
|
